Döküm Makina - DYNA-MESS APPLICATIONS

Automotive Steering Cloumn Testing Steering column testing Test benches for dynamic testing of steering column The testing of steering columns is achieved by a rotation of the steering wheel to a certain angle while the other end of the column is hold with a corresponding force. To perform these tests, two electric actuators are required. The first one is to control the angle of the steering wheel. Th...

more

Automotive Pedals Testing Pedals and pedal assemblies testing To perform tests on pedals assemblies, DYNA-MESS uses servo-pneumatic actuators. In addition to the fatigue test to be performed, testing machines by DYNA-MESS allow to evaluated other characteristics like the reliability of the bearings, cylinders, springs, etc. Pedal operation The pedals assembly, during the fatigue test, is s...

more

Automotive Gear-Shift-Mechanism Testing Gear-shift-mechanism testing Three axes servo-pneumatic testing machines are employed for the endurance test of gear-shift-mechanisms in passenger cars. By means of combining displacement and force control, gear-shift operations can be simulated and repeated several thousand times. The use of a climate chamber further ensures that the simulation is done under real con...

more

Automotive Timing Belts Test machines for timing belts/gears Dynamic testing of timing belts and gears for service life investigation The test machine is designed to perform tests on two belts simultaneously. Speed and torque can be adjusted independently for each belt to be tested. The following features are possible with this machine: Data recording of fatigue tests Pulsed testing...

more

Medical Osteosynthesis / Traumatology Osteosynthesis / Traumatology A wide variety of mechanical tests on osteosynthesis components can be performed with DYNA-MESS servo-pneumatic TP 5kN RF and TP 10kN testing machines. Bone plates ASTM F 382-99 4-points bending test on bone plates To perform this test, the bone plate is mounted on a special board. ...

more

Medical Dental Prostheses Dental prostheses and dental materials DYNAdent 14801 : perfectly adapted for dynamic testing of endosseous dental implants according to ISO 14801 The entirely electrically operated testing machine DYNAdent 14801 is especially designed for dynamic testing of dental implants according to ISO 14801 (no hydraulic or compressed air is required). The design o...

more

Medical Surgical Implants - Partial Dentures Arthroplasty A wide variety of mechanical tests can be performed on endoprostheses with DYNA-MESS servo-pneumatic testing machines. For those tests, the TP 5kN HF and the TP 10kN HF machines are used. Hips ISO 7206-4 "Implants for surgery - Partial and total hip joint prostheses - Part 4: Determination of endurance properties and performance of stemmed femor...

more

End-Of-Line Testing Machines End-of-line testing machines The end-of-line testing machines are used for in-process testing. DYNA-MESS testing machines are the perfect solution when 100% of the production needs to be controlled. In addition to the validation of the quality of the manufactured products, the end-of-line testing machines are a good quality insurance tool as the data of each test are ...

more